Product Description
The ball of the floating ball valve is freely supported on the sealing ring. Under the action of fluid pressure, it is closely connected with the downstream sealing ring to form the downstream turbulent single-side seal.It is suitable for small caliber occasions.
Fixed ball ball valve ball with up and down rotating shaft, is fixed in the ball bearing, therefore, the ball is fixed, but the sealing ring is floating, the sealing ring with spring and fluid thrust pressure to t...
Product Description
The driving part of the valve according to the valve structure and user requirements, using handle, turbine, electric, pneumatic, etc., can be based on the actual situation and user requirements to choose the appropriate driving mode.
This series of ball valve products according to the situation of medium and pipeline, and the different requirements of users, design of fire prevention, anti-static, such as structure, resistance to high temperature and low temperature can e...
main parts and materials
Body
Valve Plate
Valve Shaft
Lining
Ductile Iron
Ductile Iron
Stainless Steel 420
EPDM
Cast Steel
Stainless Steel304/316/316L
Stainless Steel 316
NBR
Stainless Steel
Aluminium Bronze
Stainless Steel 316 L
PTFE
Dual Phase Steel
Else
Else
VITON Else
Else
Else
Main Outer Size
Inch
DN
φA
φB
D
E
F
1
Note
...
Product Description
Internal thread and socket welded forged steel gate valve fluid resistance is small, open and close the torque required is small, can be used in the medium to flow in two directions of the ring network pipeline, that is, the flow of media is not restricted.When fully open, the erosion of the sealing surface by the working medium is smaller than that of the globe valve.The structure is simple, the manufacturing process is good, and the length of the structure is short.
Prod...
Design standards
• Design and manufacturing specifications: API6D/BS 5351/ISO 17292/GB 12237
• Structure length: API6D/ANSIB16.10/GB 12221
• Test and Inspection: API6D/API 598/GB 26480/GB 13927/ISO 5208
Performance Specification
• Nominal pressure: (1.6-10.0)Mpa,(150-1500)LB,10K/20K
• Strength test:PT1.5PNMpa
• Seal Test: PT1.1PNMpa
• Gas seal test: 0.6Mpa
Product Structure
ISO Law Mount Pad ...
Product Description
The opening and closing parts of J41H, J41Y, J41W GB globe valve are cylindrical disc, the sealing surface is flat or conical, and the disc moves in a straight line along the center line of the fluid.GB globe valve is only applicable to fully open and fully closed, generally not to adjust the flow, custom allowed to adjust and throttle.
Product Structure
Main Size And Weight
PN16
DN
L
D
D1
D2
f
B
B
z-Φd
JB/T
79
HG/T
20592
JB/T
79
HG/T
20592
JB/T
79
...