Pneumatic, Electric Actuator, Thread, Sanitary Clamped Ball Valve
Product Structure
main parts and materials
|
Material Name |
Q6 11/61F-(16-64)C |
Q6 11/61F-(16-64)P |
Q6 11/61F-(16-64)R |
|
Body |
WCB |
ZG1Cr18Ni9Ti |
ZG1Cr18Ni12Mo2Ti |
|
Bonnet |
WCB |
ZG1Cd8Ni9Ti |
ZG1Cd8Ni12Mo2Ti |
|
Ball |
1Cr18Ni9Ti |
1Cr18Ni9Ti |
1Cr18Ni12Mo2Ti |
|
Stem |
1Cr18Ni9Ti |
1Cr18Ni9Ti |
1Cr18Ni12Mo2Ti |
|
Sealring |
Polytetrafluorethylene(PTFE) |
||
|
Gland Packing |
Polytetrafluorethylene(PTFE) |
||
Main Outer Size
|
DN |
L |
d |
Rc |
A |
B |
C |
D |
G |
|||||
|
8 |
65 |
11 |
1/4″ |
155 |
115 |
132 |
116 |
29 |
24 |
41 |
33 |
1/4″ |
1/8″ |
|
10 |
65 |
11.5 |
3/8″ |
155 |
115 |
132 |
116 |
29 |
24 |
41 |
33 |
1/4″ |
1/8″ |
|
15 |
75 |
15 |
1/2″ |
168 |
155 |
148 |
132 |
36.5 |
29 |
46.5 |
41 |
1/4″ |
1/4″ |
|
20 |
80 |
18.5 |
3/4″ |
168 |
155 |
154.5 |
135.5 |
36.5 |
29 |
46.5 |
41 |
1/4″ |
1/4″ |
|
25 |
90 |
25 |
1″ |
168 |
155 |
164 |
148 |
36.5 |
29 |
46.5 |
41 |
1/4″ |
1/4″ |
|
32 |
110 |
32 |
1-1/4″ |
219 |
168 |
190.5 |
173 |
43 |
38.5 |
52.5 |
49.5 |
1/4″ |
1/4″ |
|
40 |
120 |
38 |
1-1/2″ |
249 |
219 |
215 |
202.5 |
49 |
43 |
56.5 |
52.5 |
1/4″ |
1/4″ |
|
50 |
140 |
49 |
2″ |
249 |
219 |
222 |
209.5 |
49 |
43 |
56.5 |
52.5 |
1/4″ |
1/4″ |
|
65 |
160 |
64 |
2-1/2″ |
274 |
249 |
247.5 |
235 |
55.5 |
49 |
66.5 |
56.5 |
1/4″ |
1/4″ |
|
80 |
180 |
77 |
3″ |
355 |
274 |
305.5 |
266.5 |
69.5 |
55.5 |
80.5 |
66.5 |
1/4″ |
1/4″ |
|
100 |
215 |
100 |
4″ |
417 |
355 |
344.5 |
325 |
78.5 |
69.5 |
91 |
80.5 |
1/4″ |
1/4″ |
Related products
-
Gu High Vacuum Ball Valve
Product Description Ball valve after more than half a century of development, now has become a widely used main valve class.The main function of the ball valve is to cut off and connect the fluid in the pipeline;It can also be used for fluid regulation and control.Ball valve has the characteristics of small flow resistance, good sealing, quick switching and high reliability. Ball valve is mainly composed of valve body, valve cover, valve stem, ball and sealing ring and other parts, belongs to...
-
Heating Ball Valae / Vessel Valve
Product Overview Three-way ball valves are Type T and Type L.T – type can make three orthogonal pipeline mutual connection and cut off the third channel, diverting, confluent effect.L Three-way ball valve type can only connect the two mutually orthogonal pipes, can not keep the third pipe connected to each other at the same time, only play a distribution role. Product Structure Heating Ball Vala Main Outer Size NOMINAL DIAMETER L P NOMINAL PRESSURE D D1 D2 B F Z...
-
High Platform Sanitary Clamped, Welded Ball Valve
Product Structure main parts and materials Material Name Cartoon steel Stainless steel Body A216WCB A351 CF8 A351 CF8M Bonnet A216WCB A351 CF8 A351 CF8M Ball A276 304/A276 316 Stem 2Cd3 / A276 304 / A276 316 Seat PTFE、 RPTFE Gland Packing PTFE / Flexible Graphite Gland A216 WCB A351 CF8 Bolt A193-B7 A193-B8M Nut A194-2H A194-8 Main Outer Size DN Inch L d D W H 20 3/4″ 155.7 15.8 19....
-
Fully-Welded Ball Valve
Product Description The ball of the floating ball valve is freely supported on the sealing ring. Under the action of fluid pressure, it is closely connected with the downstream sealing ring to form the downstream turbulent single-side seal.It is suitable for small caliber occasions. Fixed ball ball valve ball with up and down rotating shaft, is fixed in the ball bearing, therefore, the ball is fixed, but the sealing ring is floating, the sealing ring with spring and fluid thrust pressure to t...
-
ANSI Floating Flange Ball Valve
Product Overview Manual flanged ball valve is mainly used to cut off or put through the medium, can also be used for fluid regulation and control.Compared with other valves, ball valves have the following advantages: 1, the fluid resistance is small, the ball valve is one of the least fluid resistance in all valves, even if it is a reduced diameter ball valve, its fluid resistance is quite small. 2, the switch is fast and convenient, as long as the stem rotates 90°, ...
-
Fluorine Lined Ball Valve
