STAINLESS STEEL SANITARY CLAMPED CROSS JOINT
Product Structure
MAIN OUTER SIZE
|
SIZE |
Φ |
A |
B |
C |
|
1″ |
25.4 |
50.5(34) |
23 |
55 |
|
1 1/2″ |
38.1 |
50.5 |
35.5 |
70 |
|
2” |
50.8 |
64 |
47.8 |
82 |
|
2 1/2″ |
63.5 |
77.5 |
59.5 |
105 |
| 3″ |
76.2 |
91 |
72.3 |
110 |
|
4″ |
101.6 |
119 |
97.6 |
160 |
Related products
-
Forged Steel Gate Valve
Product Description Internal thread and socket welded forged steel gate valve fluid resistance is small, open and close the torque required is small, can be used in the medium to flow in two directions of the ring network pipeline, that is, the flow of media is not restricted.When fully open, the erosion of the sealing surface by the working medium is smaller than that of the globe valve.The structure is simple, the manufacturing process is good, and the length of the structure is short. Prod...
-
Handle wafer butterfly valve
main parts and materials Body Valve Plate Valve Shaft Lining Ductile Iron Ductile Iron Stainless Steel 420 EPDM Cast Steel Stainless Steel304/316/316L Stainless Steel 316 NBR Stainless Steel Aluminium Bronze Stainless Steel 316 L PTFE Dual Phase Steel Else Else VITON Else Else Else Main Outer Size Inch DN φA φB D E F 1 Note ...
-
Fully-Welded Ball Valve
Product Description The ball of the floating ball valve is freely supported on the sealing ring. Under the action of fluid pressure, it is closely connected with the downstream sealing ring to form the downstream turbulent single-side seal.It is suitable for small caliber occasions. Fixed ball ball valve ball with up and down rotating shaft, is fixed in the ball bearing, therefore, the ball is fixed, but the sealing ring is floating, the sealing ring with spring and fluid thrust pressure to t...
-
3000wog 2pc Type Ball Valve With Internal Thread
Product Structure main parts and materials Material Name Carbon steel Stainless steel Forged steel Body A216 WCB A352 LCB A352 LCC A351 CF8 A351 CF8M A105 A350 LF2 Bonnet Ball A276 304/A276 316 Stem 2Cr13 / A276 304 / A276 316 Seat PTFEx CTFEx PEEK、DELBIN Gland Packing PTFE / Flexible Graphite Gland A216 WCB A351 CF8 A216 WCB Bolt A193-B7 A193-B8M A193-B7 Nut A194-2H A194-8 A194-2H Main Size And Weight D...
-
Gb, Din Gate Valve
Products Design Features Gate valve is one of the most commonly used cut-off valves, it*s mainly used to connect and disconnect media in pipe. The range of suitable pressure, temperature and caliber is very wide. It is widely used in water supply and drainage, gas, electric power, petroleum, chemical industry, metallurgy and other industrial pipeline which media is steam, water, oil to cut off or adjust the flow of media. Main Structural Features Fluid resistance is small. It is more labor-sa...
-
NON-RISING STEM GATE
Product Structure MAIN OUTER SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 L 178 190 203 229 254 267 292 330 356 381 406 432 457 508 610 660 DO 160 160 200 200 225 280 330 385 385 450 450 520 620 458 458 458 Non-Rising Stem Hmax 198 225 293 303 340 417 515 621 710 869 923 1169 1554 1856 2176 2598 350 406 520 ...
