STAINLESS STEEL SANITARY WELDING 90°ELBOW
Product Structure
MAIN OUTER SIZE
|
SIZE |
D |
A |
|
1″ |
25.4 |
33.5 |
|
1 1/4″ |
31.8 |
41 |
|
1 1/2″ |
38.1 |
48.5 |
|
2″ |
50.8 |
60.5 |
|
2 1/2″ |
63.5 |
83.5 |
|
3″ |
76.3 |
88.5 |
|
3 1/2″ |
89.1 |
403.5 |
|
4″ |
101.6 |
127 |
Related products
-
PNEUMATIC KNIFE GATE VALVE
Product Structure Main Outer Size DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 L 48 48 51 51 57 57 70 70 76 76 89 89 114 114 H 335 363 395 465 530 630 750 900 1120 1260 1450 1600 1800 2300 Main Parts Material 1.0Mpa/1.6Mpa Part Name Material Body/Cover Carbon Steel.Stainless Steel Fashboard Carbon Steel.Stainless Steel Stem Stainless Steel Seali...
-
Heating Ball Valae / Vessel Valve
Product Overview Three-way ball valves are Type T and Type L.T – type can make three orthogonal pipeline mutual connection and cut off the third channel, diverting, confluent effect.L Three-way ball valve type can only connect the two mutually orthogonal pipes, can not keep the third pipe connected to each other at the same time, only play a distribution role. Product Structure Heating Ball Vala Main Outer Size NOMINAL DIAMETER L P NOMINAL PRESSURE D D1 D2 B F Z...
-
STAINLESS STEEL SANITARY BAR CLAMP
Product Structure MAIN OUTER SIZE SIZE Φ A B 1″-1 1/2″ 19-38 53.5 44.5 2″ 50.8 66.5 57.5 2 1/2″ 63.5 81 72.0 3″ 76.2 94 85.0 3 1/2″ 89.1 108 102 4″ 101.6 122 113
-
Pneumatic Flange Ball Valve
Product Description The ball of the floating ball valve is freely supported on the sealing ring. Under the action of fluid pressure, it is closely connected with the downstream sealing ring to form the downstream turbulent single-side seal.It is suitable for small caliber occasions. Fixed ball ball valve ball with up and down rotating shaft, is fixed in the ball bearing, therefore, the ball is fixed, but the sealing ring is floating, the sealing ring with spring and fluid thrust pressure to t...
-
Gb Flange, Wafer Butterfly Valve(Metal Seat, So...
Design standards • Design and manufacturing specifications: API6D/BS 5351/ISO 17292/GB 12237 • Structure length: API6D/ANSIB16.10/GB 12221 • Test and Inspection: API6D/API 598/GB 26480/GB 13927/ISO 5208 Performance Specification • Nominal pressure: （1.6-10.0）Mpa，（150-1500）LB,10K/20K • Strength test:PT1.5PNMpa • Seal Test: PT1.1PNMpa • Gas seal test: 0.6Mpa Product Structure ISO Law Mount Pad ...
-
Manual / Pneumatic Knife Gate Valve
Product Description The opening and closing part of the knife gate valve is the gate plate, the movement direction of the gate plate is perpendicular to the direction of the fluid, the knife gate valve can only be fully open and fully closed, and can not be adjusted and throttled.Knife gate valve is mainly composed of valve body, O-ring, gate, stem, bracket and other components.The knife gate valve adopts the one-piece structure with small volume and light weight.Ful...
