Y-Type Female Strainer
Product Structure
Main Parts And Materials
|
Material Name |
SY11-(16-64)C |
SY11-(16-64)P |
SY11-(16-64)R |
|
Body |
WCB |
ZG1CN8Ni9Ti |
ZG1Cr18Ni12Mo2Ti |
|
Bonnet |
WCB |
ZG1Cr18Ni9Ti |
ZG1Cr18Ni12Mo2Ti |
|
Mesh |
ICr18Ni9Ti |
ICr18Ni9Ti |
1Cr18Ni12Mo2Ti |
|
Gasket |
Polytetrafluorethylene(PTFE) |
||
Main size and weight
|
DN |
G |
L |
W |
B |
H |
|
8 |
1/4″ |
64 |
12 |
24 |
44 |
|
10 |
3/8″ |
64 |
12 |
24 |
44 |
|
15 |
1/2″ |
64 |
14 |
26 |
44 |
|
20 |
3/4″ |
75 |
15 |
32 |
52 |
|
25 |
1″ |
89 |
17 |
41 |
64 |
|
32 |
1 1/4″ |
102 |
20 |
49 |
68 |
|
40 |
1 1/2″ |
118 |
20 |
56 |
76 |
|
50 |
2″ |
139 |
22 |
69 |
88 |
|
65 |
2 1/2″ |
180 |
28 |
84 |
110 |
|
80 |
3″ |
200 |
32 |
98 |
135 |
Related products
-
Stainless Steel Direct Drink Water Ball Valve (...
Main Parts And Materials Material Name Q11F-(16-64)C Q11F-(16-64)P Q11F-(16-64)R Body WCB ZG1Cr18Ni9Ti CF8 ZG1Cr18Ni12Mo2Ti CF8M Bonnet WCB ZG1Cr18Ni9Ti CF8 ZG1Cr18Ni12Mo2Ti CF8M Ball ICr18Ni9Ti 304 ICd8Ni9Ti 304 1Cr18Ni12Mo2Ti 316 Stem ICr18Ni9Ti 304 ICr18Ni9Ti 304 1Cd8Ni12Mo2Ti 316 Sealring Polytetrafluorethylene(PTFE) Gland Packin Polytetrafluorethylene(PTFE) Main Outer Size DN Inch L d G W H 15 1/2″ 51.5 11.5 1/2″ 95 49.5 ...
-
Slab Gate Valve
Product Description This series product adopt new floating type sealing structure, is applicable to pressure is not greater than 15.0 MPa, temperature – 29 ~ 121 ℃ on the oil and gas pipeline, as control opening and closing of the medium and adjusting device, the product structure design, select material appropriate, strict testing, convenient operation, strong anti-corrosion, wear resistance, erosion resistance,It is an ideal new equipment in petroleum industry. 1. Adopt floating valve...
-
Fluorine Lined Ball Valve
-
(SMS)ROUND NUT(SMS)
Product Structure MAIN OUTER SIZE A B C D Kg 25 50 20 40×1/6 32 0.135 32 60 20 48×1/6 40 0.210 38 72 22 60×1/6 48 0.235 51 82 22 70×1/6 60.5 0.270 63 97 25 85×1/6 74 0.365 76 111 26 98×1/6 87 0.45 89 125 28 110×1/6 100 0.660 102 146 30 132×1/6 117 0.985
-
Ansi, Jis Globe Valve
Product Description J41H flanged globe valves are designed and manufactured to API and ASME standards.Globe valve, also known as cut-off valve, belongs to the forced sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface not to leak.When the medium from the lower part of the disc into the valve, the operation force needed to overcome the resistance is the friction force of the stem and packing and the thrust generated by the pressure of t...
-
Pneumatic Flange Ball Valve
Product Description The ball of the floating ball valve is freely supported on the sealing ring. Under the action of fluid pressure, it is closely connected with the downstream sealing ring to form the downstream turbulent single-side seal.It is suitable for small caliber occasions. Fixed ball ball valve ball with up and down rotating shaft, is fixed in the ball bearing, therefore, the ball is fixed, but the sealing ring is floating, the sealing ring with spring and fluid thrust pressure to t...
