Isihluzi

I-Y STRAINER

Lo mkhiqizo ufakwe kakhulu kuzo zonke izinhlobo zokuphakelwa kwamanzi nezintambo zokudonsa amanzi noma izintambo zesitimu nezintambo zegesi.Ukuvikela ezinye izinto ezifakwayo noma amavalvu emfucumfucwini nasekungcoleni ohlelweni.

Bona imikhiqizo eminingi>
I-Y12 Series Relieve Valve

IMICIMBI

Ingcindezi encane: 1.0 ~ 1.6Mpa
Ingcindezi yokuhlola amandla: PT1.5, PT2.4
Ingcindezi yokuhlola isihlalo(ingcindezi ephansi):0.6Mpa
Izinga lokushisa elisebenzayo: 0-80℃
Indawo Esebenzayo: Amanzi, Amafutha, Igesi,
I-Non corrosive fluid medium

Bona imikhiqizo eminingi>
Ansi, Jis Flanged Strainers

Ukucaciswa kokusebenza

• Ukuphela kwe-Flange: ASME B16.5
• Amazinga okuhlola: API 598

imininingwane

- Ukucindezela okuzisholo: CLASS150/300
• Ukucindezela kokuhlolwa kweshell: PT1.5PN
• Imidiya efanelekile:
SY41-(150-300BL)C Amanzi. Amafutha. Igesi
I-Sy41-(150-300BL)P i-Nitric acid
I-Sy41-(150-300BL)R I-acetic acid
• Izinga lokushisa elifanele: -29°C-425°C

Bona imikhiqizo eminingi>
I-Y-Type Female Strainer

Imininingwane

• Ingcindezi yamagama: PN1.6,2.5,4.0,6.4Mpa
- Ingcindezi yokuhlola amandla: PT2.4, 3.8,6.0, 9.6MPa
• Izinga lokushisa elisebenzayo: -24℃~150℃
• Imidiya esebenzayo:

SY11-(16-64)C Amanzi. Amafutha. Igesi

I-SY11-(16-64)P I-Nitric acid

I-SY11-(16-64)R I-acetic acid

Bona imikhiqizo eminingi>
Gb, Din Flanged Strainers

Amazinga Omkhiqizo

- Ukuphela kwe-Flange: GB/T 9113, JB/T 79, HG/T 20529, EN 1092
• Amazinga okuhlola: GB/T 13927, API 598

imininingwane

- Ukucindezela okuzisholo: PN1.6,2.5MPa
- Ukucindezela kokuhlolwa kweShell: PT2.4, 3.8MPa
• Imidiya efanelekile:
SY41-(16-25)C Amanzi. Amafutha. Igesi
I-SY41-(16-25)P i-Nitric acid,
I-SY41-(16-25)R I-acetic acid
• Izinga lokushisa elifanele: -29℃~425℃

Bona imikhiqizo eminingi>
I-Stainless Steel Angle Seat Valve

UKUDIYINA NOKUKHIQIZA IZINGA

• Dizayina futhi ukhiqize njenge-GB/T12235, ASME B16.34
• Qeda ubukhulu be-flange njenge-JB/T 79, ASME B16.5, JIS B2220
• Ukuphela kwentambo kuhambisana ne-ISO7-1, ISO 228-1 njll.
• I-butt weld igcina ihambisana ne-GB/T 12224, ASME B16.25
• Iziphetho ze-clamp zihambisana ne-ISO, i-DIN, i-IDF
• Ukuhlolwa kwengcindezi njenge-GB/T 13927, API598

Imininingwane

• Ingcindezi encane: 0.6-1.6MPa,150LB,10K
- Ukuhlolwa kwamandla: PN x 1.5MPa
- Ukuhlola uphawu: PNx 1.1MPa
• Ukuhlola uphawu lwegesi: 0.6MPa
• Impahla yomzimba yevalvu: CF8(P), CF3(PL), CF8M(R), F3M(RL)
• Indawo efanelekile: amanzi, isitimu, imikhiqizo kawoyela, i-nitric acid, i-acetic acid
• Izinga lokushisa elifanele: -29℃~150℃

Bona imikhiqizo eminingi>