Sanitary Diaphragm Valve
Product Description
The inside and outside of the sanitary fast assembling diaphragm valve are treated with high-grade polishing equipment to meet the surface precision requirements. The imported welding machine is purchased for spot welding. It can not only meet the health quality requirements of the above industries, but also replace imports. The utility model has the advantages of simple structure, beautiful appearance, quick assembly and disassembly, quick switch, flexible operation, small fluid resistance, safe and reliable use, etc. The joint steel parts are made of acid resistant stainless steel, and the seals are made of food silica gel or polytetrafluoroethylene, meeting the food hygiene standards.
[technical parameters]
Maximum working pressure: 10bar
Driving mode: Manual
Maximum working temperature: 150 ℃
Applicable media: EPDM steam, PTFE water, alcohol, oil, fuel, steam, neutral gas or liquid, organic solvent, acid-base solution, etc
Connection mode: butt welding (g / DIN / ISO), quick assembly, flange
[product features]
1. The opening and closing parts of elastic seal, the arc-shaped design structure of valve body sealing weir groove ensure no internal leakage;
2. The streamline flow channel reduces the resistance;
3. The valve body and the cover are separated by the middle diaphragm, so that the valve cover, stem and other parts above the diaphragm are not eroded by the medium;
4. The diaphragm can be replaced and the maintenance cost is low
5. Visual position display switch status
6. A variety of surface polishing technology, no dead angle, no residue in the normal position.
7. Compact structure, suitable for small space.
8. The diaphragm meets the safety standards of FDA, ups and other authorities for the drug and food industry.
Product Structure
Main Outer Size
|
Specifications(ISO) |
A |
B |
F |
|
15 |
108 |
34 |
88/99 |
|
20 |
118 |
50.5 |
91/102 |
|
25 |
127 |
50.5 |
110/126 |
|
32 |
146 |
50.5 |
129/138 |
|
40 |
159 |
50.5 |
139/159 |
|
50 |
191 |
64 |
159/186 |
Related products
-
Forged Steel Gate Valve
Product Description Forged steel gate valve fluid resistance is small, open, close the torque required is small, can be used in the medium to flow in two directions of the ring network pipeline, that is, the flow of media is not restricted.When fully open, the erosion of the sealing surface by the working medium is smaller than that of the globe valve.The structure is simple, the manufacturing process is good, and the length of the structure is short. Product Structure Main Size And Weight...
-
Ansi Flange, Wafer Butterfly Valve (Metal Seat,...
Design standards • Design and manufacturing specifications: API6D/BS 5351/ISO 17292/GB 12237 • Structure length: API6D/ANSIB16.10/GB 12221 • Test and Inspection: API6D/API 598/GB 26480/GB 13927/ISO 5208 Performance Specification • Nominal pressure: （1.6-10.0）Mpa，（150-1500）LB,10K/20K • Strength test:PT1.5PNMpa • Seal Test: PT1.1PNMpa • Gas seal test: 0.6Mpa Product Structure ISO Law Mount Pad ...
-
(DIN)EXPANDING MALE(DIN)
Product Structure MAIN OUTER SIZE OD/IDxt B C Kg 10 18/10×4 21 28×1/8 0.13 15 24/16×4 21 34×1/8 0.15 20 30/20×5 24 44×1/6 0.25 25 35/26×4.5 29 52×1/6 0.36 32 41/32×4.5 32 58×1/6 0.44 40 48/38 x5 33 65×1/8 0.50 50 61/50×6.5 35 78×1/6 0.68 65 79/66 x 6.5 40 95×1/6 1.03 80 93/81×6 45 110×1/4 1.46 ...
-
Threaded sanitary butterfly valve
Product Structure MAIN OUTER SIZE 规格(ISO) A B D L H Kg 25 66 78 40×1/6 130 82 1.3 32 66 78 48×1/6 130 82 1.3 38 70 86 60×1/6 130 86 1.7 51 76 102 70×1/6 140 96 2.2 63 80 115 85×1/6 150 103 2.9 76 84 128 98×1/6 150 110 3.4 89 90 139 110×1/6 170 116 3.9 102 104 159 132 x 1/6 170 126 5.5
-
STONLESS STEEL SANITARY CLAMPED 90°ELBOW
Product Structure MAIN OUTER SIZE SIZE Φ A B C 1″ 25.4 50.5(34) 23 55 1 1/4″ 31.8 50.5 28.5 60 1 1/2″ 38.6 50.5 35.5 70 2″ 50.8 64 47.8 80 2 1/2″ 63.5 77.6 59.5 105 3″ 76.2 91.1 72.3 110 3 1/2″ 89.1 106 85 146 4″ 101.6 119 97.6 160
-
Gb Flange, Wafer Butterfly Valve(Metal Seat, So...
Design standards • Design and manufacturing specifications: API6D/BS 5351/ISO 17292/GB 12237 • Structure length: API6D/ANSIB16.10/GB 12221 • Test and Inspection: API6D/API 598/GB 26480/GB 13927/ISO 5208 Performance Specification • Nominal pressure: （1.6-10.0）Mpa，（150-1500）LB,10K/20K • Strength test:PT1.5PNMpa • Seal Test: PT1.1PNMpa • Gas seal test: 0.6Mpa Product Structure ISO Law Mount Pad ...
