Product Overview
Three-way ball valves are Type T and Type L.T – type can make three orthogonal pipeline mutual connection and cut off the third channel, diverting, confluent effect.L Three-way ball valve type can only connect the two mutually orthogonal pipes, can not keep the third pipe connected to each other at the same time, only play a distribution role.
Product Structure
Heating Ball Vala Main Outer Size
NOMINAL DIAMETER
L
P
NOMINAL PRESSURE
D
D1
D2
B
F
Z...
Product Description
The driving part of the valve according to the valve structure and user requirements, using handle, turbine, electric, pneumatic, etc., can be based on the actual situation and user requirements to choose the appropriate driving mode.
This series of ball valve products according to the situation of medium and pipeline, and the different requirements of users, design of fire prevention, anti-static, such as structure, resistance to high temperature and low temperature can e...
Product Description
Ball valve after more than half a century of development, now has become a widely used main valve class.The main function of the ball valve is to cut off and connect the fluid in the pipeline;It can also be used for fluid regulation and control.Ball valve has the characteristics of small flow resistance, good sealing, quick switching and high reliability.
Ball valve is mainly composed of valve body, valve cover, valve stem, ball and sealing ring and other parts, belongs to...
Product Structure
Main Parts And Materials
Material Name
SY11-(16-64)C
SY11-(16-64)P
SY11-(16-64)R
Body
WCB
ZG1CN8Ni9Ti
CF8
ZG1Cr18Ni12Mo2Ti
CF8M
Bonnet
WCB
ZG1Cr18Ni9Ti
CF8
ZG1Cr18Ni12Mo2Ti
CF8M
Mesh
ICr18Ni9Ti
304
ICr18Ni9Ti
304
1Cr18Ni12Mo2Ti
316
Gasket
Polytetrafluorethylene(PTFE)
Main size and weight
DN
G
L
W
B
H
8
1/4″
64
12
24
44
10
3/8″
64
12
24
44
15
1/2″
64
14
...
Product Description
J41H flanged globe valves are designed and manufactured to API and ASME standards.Globe valve, also known as cut-off valve, belongs to the forced sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface not to leak.When the medium from the lower part of the disc into the valve, the operation force needed to overcome the resistance is the friction force of the stem and packing and the thrust generated by the pressure of t...