The SP45F static balance valve produced by Tyco Valve Co., Ltd. is a relatively balanced valve used to adjust the pressure on both sides. So how should this valve be installed correctly? Tyco Valve Co., Ltd. will tell you about it below!
Correct installation method of static balancing valve:
1. This valve can be installed on both the water supply pipeline and the return water pipeline. However, in high-temperature loops, it is installed on the return water pipeline to facilitate debugging.
2. There is no need to install an additional stop valve in the pipeline where this valve is installed.
3. When installing the valve, make sure that the flow direction of the medium is the same as the flow direction indicated on the valve body.
4. When installing, leave sufficient length at the inlet and outlet of the valve to make the flow measurement more accurate.
Post time: Feb-22-2024