Industry News
-
Application of Taike Valve Stop Valve in High Pressure Grouting Accident Treatment
During high-pressure grouting construction, at the end of grouting, the flow resistance of cement slurry is very high (usually 5MPa), and the working pressure of the hydraulic system is very high. A large amount of hydraulic oil flows back to the oil tank through the bypass, with the reversing va...Read more -
The characteristics and application range of stainless steel flange globe valve!
Taike Valve’s stainless steel globe valve is a valve that is widely used. It has small friction between sealing surfaces, low opening speed, and easy maintenance. It is not only suitable for high pressure, but also suitable for low pressure. Then its characteristics what is it then? Let Tai...Read more -
Taike Valves – Types of Valves
A valve is a mechanical device that controls the flow, flow direction, pressure, temperature, etc. of a flowing fluid medium, and a valve is a basic component in a piping system. Valve fittings are technically the same as pumps and are often discussed as a separate category. So what are the types...Read more -
Selection of chemical valves
Key points of valve selection 1. Clarify the purpose of the valve in the equipment or device Determine the working conditions of the valve: the nature of the applicable medium, the working pressure, the working temperature and the control method of operation, etc. 2. Correctly choose the type of ...Read more -
Selection and Use of Pneumatic Control Valves in Chemical Valves
With the advancement of China’s technological level, the automated valves produced by ChemChina have also been implemented swiftly, which can complete the accurate control of flow, pressure, liquid level and temperature. In the chemical automatic control system, the regulating valve belongs...Read more -
Material selection of chemical valves for all-welded ball valves
Corrosion is one of the hazards of chemical equipment headaches. A slight carelessness can damage the equipment, or cause an accident or even a disaster. According to relevant statistics, about 60% of the damage of chemical equipment is caused by corrosion. Therefore, the scientific nature of the...Read more -
Types and selection of metal valves commonly used in chemical plants
Valves are an important part of the pipeline system, and metal valves are the most widely used in chemical plants. The function of the valve is mainly used for opening and closing, throttling and ensuring the safe operation of pipelines and equipment. Therefore, the correct and reasonable selecti...Read more -
Principles for the selection of chemical valves
Types and functions of chemical valves Open and close type: cut off or communicate the flow of fluid in the pipe; regulation type: adjust the flow and velocity of the pipe; Throttle type: make the fluid produce a great pressure drop after passing through the valve; Other types: a. Automatic openi...Read more -
How much do you know about check valves?
1. What is a check valve? 7. What is the principle of operation? Check valve is a written term, and is generally called a check valve, check valve, check valve or check valve in the profession. Regardless of how it is called, according to the literal meaning, we can roughly judge the role of...Read more -
What does the arrow on the valve mean
The direction of the arrow marked on the valve body indicates the pressure bearing direction of the valve, which is generally used by the engineering installation company as the medium flow direction symbol to cause leakage and even cause pipeline accidents; The pressure bearing direction re...Read more -
Why should the stop valve have low inlet and high outlet?
Why should the stop valve have low inlet and high outlet? stop valve, also known as stop valve , is a forced-sealing valve, which is a kind of stop valve . According to the connection method, it is divided into three types: flange connection, thread connection, and welding connection. Ch...Read more -
Installation method of silent check valve
Silent check valve: The upper part of the valve clack and the lower part of the bonnet are processed with guide sleeves. The disc guide can be freely raised and lowered in the valve guide. When the medium flows downstream, the disc opens by the thrust of the medium. When the medium stops...Read more
